158
Q7 ASD Installation and Operation Manual
Conduit Box Information
The conduit plate information provided below is for the VT130 Series Size 1 ASDs listed in
.
The Conduit Box (P/N ASD-Conduit-1) may be used when more room is required at the ASD conduit
connection point for the stand-alone devices. This option makes adding and removing conduit easier
and quicker.
Installation
1.
Remove the conduit plate (P/N 55295 of
2.
Install the Conduit Box (P/N 53354 of
), using the 2 screws from the conduit plate.
3.
Complete the conduit and wiring connections.
4.
Install the Conduit Box cover (P/N 53355 of
).
Figure 30. Remove Conduit Plate.
Figure 31. Conduit Box and Cover.