background image

   

E6580724

Parameter Writer Operation Manual

PWU001Z-1

Table of Contents

1. OVERVIEW

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

4

2. NAMES AND FUNCTIONS OF MAIN PARTS

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

5

3. CONNECTION AND START-UP

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

6

4. FUNCTIONS IN DETAIL

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

7

4.1. Copying function

copy

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

7

4.2. Simply copying function

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

8

4.3. Comparing function

comp

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

9

4.4. Memory protection function

prot

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

11

4.5. Memory initializing function

clr

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

12

4.6. Function to serve as remote keypad

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

12

5. INDICATIONS ON DISPLAY

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

13

6. RESETTING FUNCTION

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

14

7. SPECIFICATIONS

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

14

8. WARRANTY

・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・

14

This Parameter Writer cannot use at TOSVERT VF-S7/S7e inverter has a CPU whose version
is V100 to V103.
For checking the version number of the CPU, refer to the “Monitor” paragraph in the instruction
manual of the inverter.

© Toshiba Corporation 1996

All Rights Reserved.

NOTES

1. Make sure that this instruction manual is delivered to the end user of the Parameter Writer.
2. Read this manual before installing or operating the Parameter Writer. And keep it in a safe

place for reference.

Summary of Contents for PWU001Z-1

















Reviews: