manualshive.com logo in svg

Toshiba Portege R30-A Series, User Manual

The Toshiba Portege R30-A Series is a high-performance laptop that caters to professionals on-the-go. Seamlessly blending power and portability, this cutting-edge device comes with a comprehensive User Manual that can be easily downloaded for free from our manualshive.com. Get all the information you need to maximize your productivity.

Share
Download
background image

95

Mobile Computing

Monitoring battery power

HINT: Be careful not to confuse the battery light 
(

)/power light (

), and the power button light.

When the power light or power button light flashes 
amber, it indicates that the system is suspended (using 
the Windows

®

 operating system Sleep command).

   

 

(Sample Illustration) Power and battery light locations

Determining remaining battery power

Wait a few moments after turning on the computer before 
trying to monitor the remaining battery power. The 
computer needs this time to check the battery’s 
remaining capacity and perform its calculations.

Move the pointer over the power icon in the notification area, 
see 

“Finding your way around the desktop” on page 108

 for 

more information on the notification area. A pop-up message 
displays the remaining battery power as a percentage.

With repeated discharges and recharges, the battery’s 
capacity gradually decreases. A frequently used older 
battery does not power the computer for as long as a new 
battery, even when both are fully charged.

AC power light/Battery light

System indicator lights

ON/OFF light

Internal storage drive light

Wireless indicator lights

NOTE

Summary of Contents for Portege R30-A Series










































































































































































































Reviews:

No comments

Related manuals for Portege R30-A Series

Panasonic ToughBook CF-72 Series Operating Instructions Manual preview
ToughBook CF-72 Series
Brand: Panasonic Pages: 68
Panasonic Touchbook CF-50 Series Reference Manual preview
Touchbook CF-50 Series
Brand: Panasonic Pages: 56
Panasonic Toughbook CF-T8EWATZJM Reference Manual preview
Toughbook CF-T8EWATZJM
Brand: Panasonic Pages: 133
Panasonic Toughbook CF-T8EWATZJM Operating Instructions Manual preview
Toughbook CF-T8EWATZJM
Brand: Panasonic Pages: 40
Panasonic Toughbook CF-31AGP7B2M Operating Instructions Manual preview
Toughbook CF-31AGP7B2M
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-H1ADBAZCM Reference Manual preview
Toughbook CF-H1ADBAZCM
Brand: Panasonic Pages: 113
Panasonic Toughbook CF-T7BWATZJM Operating Instructions Manual preview
Toughbook CF-T7BWATZJM
Brand: Panasonic Pages: 44
IBM THINKPAD 92P1956 Manual preview
THINKPAD 92P1956
Brand: IBM Pages: 10
IBM CL57 Manual preview
CL57
Brand: IBM Pages: 33
IBM ThinkPad A22e Hardware Maintenance Manual preview
ThinkPad A22e
Brand: IBM Pages: 142
EUROCOM 4200 San Marino User Manual preview
4200 San Marino
Brand: EUROCOM Pages: 281
Acer Predator PTX17-71 Lifecycle Extension Manual preview
Predator PTX17-71
Brand: Acer Pages: 44
Acer Aspire 5942G Quick Manual preview
Aspire 5942G
Brand: Acer Pages: 13
Craig CLP289 Owner'S Manual preview
CLP289
Brand: Craig Pages: 24
Dell Inspiron 14 5458 Service Manual preview
Inspiron 14 5458
Brand: Dell Pages: 101
dynabook EX40L-J Series Maintenance Manual preview
EX40L-J Series
Brand: dynabook Pages: 45
dynabook PORTEGE X40-K User Manual preview
PORTEGE X40-K
Brand: dynabook Pages: 141
Gateway and 6000 Series Hardware Reference Manual preview
and 6000 Series
Brand: Gateway Pages: 68

Brands by name

Popular brands

Load more brands