Toshiba Portege R30-A Series User Manual Download

Page: 149 / 201

149

If Something Goes Wrong

Memory problems

When the Windows

charms appear, click or touch the

Settings

(

) charm.

In the lower right of the screen click or touch the

Power

(

) icon.

(Sample Image) Shut down

While holding the

Shift

key, click or touch the

Shut

down

option.

The computer closes all open applications, shuts down
the operating system, and then turns off.

Check for the error again.

If the error recurs, remove the memory module entirely
and check for the error again.

If removing the memory module eliminates the error, the
memory module may be faulty. If the error recurs without
the memory module installed, the error is not caused by
the memory module.

TECHNICAL NOTE: You must have at least one memory
module installed for the computer to work.

For this model, Slot A is the bottom slot. Slot B is the top
slot. If only one memory module is to be installed, it must
be installed in Slot A.

Shut down option

Power

NOTE

Summary of Contents for Portege R30-A Series










































































































































































































Search results

Summary of Contents for Portege R30-A Series

Reviews:

Related manuals for Portege R30-A Series

Brands by name

Popular brands

Toshiba Portege R30-A Series, User Manual

Search results

Summary of Contents for Portege R30-A Series

Reviews:

Related manuals for Portege R30-A Series

Brands by name

Popular brands