background image

6

USA 

Federal Communications Commission 
Statement

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, 
and (2) This device must accept any interference 
received, including interference that may cause 
undesired operation.

Interference

This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant 
to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against 
harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, 
there is no guarantee that interference will not occur 
in a particular installation. If this equipment does 
cause harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try 
to correct the interference by one of the following 
measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment 

and receiver.

•  Connect the equipment into an outlet on a circuit 

different from that to which the receiver is 
connected.

•  Consult the dealer or an experienced radio/TV 

technician for help.

Important:

 Any changes or modifi cations not 

expressly approved by the party responsible for 
compliance could void the user’s authority to 
operate this equipment.

Bluetooth

®

 Wireless Technology and Your 

Health

The products with Bluetooth

®

 wireless technology, 

like other radio devices, emit radio frequency 
electromagnetic energy. 

The level of energy emitted by devices with Bluetooth

®

 

wireless technology however is much less than the 
electromagnetic energy emitted by wireless devices 
such as mobile phones. 

Because products with Bluetooth

®

 wireless technology 

operate within the guidelines found in radio frequency 
safety standards and recommendations, TOSHIBA 
believes Bluetooth

®

 wireless technology is safe for 

use by consumers.

These standards and recommendations refl ect the 
consensus of the scientifi c community and result 
from deliberations of panels and committees of 
scientists who continually review and interpret the 
extensive research literature.

In some situations or environments, the use of 
Bluetooth

®

 wireless technology may be restricted 

by the proprietor of the building or responsible 
representatives of the organization. 

These situations may, for example, include in any 
other environment where the risk of interference to 
other devices or services is perceived or identifi ed as 
harmful.

If you are uncertain of the policy that applies on the 
use of wireless devices in a specifi c organization or 
environment (e.g. airports), you are encouraged 
to ask for authorization to use the device with 
Bluetooth

®

 wireless technology prior to turning on 

the equipment.

Summary of Contents for PA5075U-1SPA





















Reviews: