25
ADJUSTMENT
5) Vertical position adjustment
Both screws (A) and (B) need to adjust the same rotation to the same direction so that vertical
position can be changed.
(A)
(B)
A
B
A
B
6) Horizontal
position
adjustment
(1) Loosen
screw
(E).
(2) Adjust screw (D) so that horizontal image position can be adjusted.
(3) Tighten screw (E) thus the adjustment base will not move.
(D)
(E)
D
D
7) Image size adjustment
Adjustment screw (F) would be rotated so that entire table will move front and back.
Outside frame test signal has 6 pixels size for the line. Adjust the size to the position that 2
pixels will be hidden by mullion. The outside line will appear for 4 pixels thickness in the
image.
Do not adjust this if mechanism comes to an end, further adjustment will damage the mechanism.
(F)
F
F
Important Notice:
Do not exceed the adjustment too much, mechanism comes to the end of its adjustment area,
there is no stopper mechanism provided and further forcing to do so will make fatal damage to
the mechanism.
In such case, Lens Mount Position needs to be corrected at right position.
