Toshiba P300 Series User Manual Download Page 107

Page: 107 / 185

User’s Manual

6-2

Power and Power-Up Modes

Power indicators

As shown in the above table, the

Battery

and

Power

indicators on the

system indicator alert you to the computer’s operating capability and

battery charge status.

Battery indicator

Check the

Battery

indicator to determine the status of the battery pack.

The following indicator lights indicate the battery status:

Power indicator

Check the

Power

indicator to determine the power status:

Flashing orange

The battery charge is low. The AC adaptor must

be connected to recharge the battery.

Orange

Indicates the AC adaptor is connected and

charging the battery.

White/Green

Indicates the AC adaptor is connected and the

battery is fully charged.

No light

Under any other conditions, the indicator does

not light.

If the battery becomes too hot while it is being charged, the charge will

stop and the battery indicator will go out. When the battery’s temperature

falls to a normal range, charge will resume. This occurs whether the

computer's power is on or off.

White/Green

Indicates power is being supplied to the

computer and the computer is turned on.

Blinking orange

Indicates power is being supplied to the

computer while the computer is in Sleep Mode.

The indicator turns on for one second and off for

two seconds.

No light

Under any other conditions, the indicator does

not light.

Summary of Contents for P300 Series


























































































































































































Search results

Summary of Contents for P300 Series

Reviews:

Related manuals for P300 Series

Brands by name

Popular brands

Toshiba P300 Series, User Manual

Search results

Summary of Contents for P300 Series

Reviews:

Related manuals for P300 Series

Brands by name

Popular brands