DISASSEMBLY INSTRUCTIONS
B1-2
1-6: VCR DECK (Refer to Fig. 1-6)
1.
2.
3.
4.
5.
6.
Remove the 2 screws
1
.
Remove the DVD Shield.
Remove the 4 screws
2
.
Remove the DVD Block in the direction of arrow (A).
Remove the 2 screws
3
.
Remove the Operation PCB in the direction of arrow (B).
Fig. 1-6
1-7: DVD PCB/DVD DECK (Refer to Fig. 1-7)
1.
2.
3.
4.
5.
6.
7.
8.
Make the short circuit on the position as shown Fig. 1-7
using a soldering. If you remove the DVD Deck with no
soldering, the Laser may be damaged.
Remove the 3 screws
1
.
Remove the DVD Top in the direction of arrow (A).
Disconnect the following connectors:
(CP2001, CP2301 and CP2302).
Remove the 4 screws
2
.
Remove the DVD Deck in the direction of arrow (B).
Remove the 4 screws
3
.
Remove the DVD PCB in the direction of arrow (C).
NOTE
When the installation of the DVD Deck, remove all the
soldering on the short circuit position after the connection of
Pick Up PCB and DVD PCB connector.
DVD Block
2
DVD Shield
2
2
2
1
1
(A)
3
3
(B)
Operation PCB
Bottom Plate
1-8: DEFLECTION PCB (Refer to Fig. 1-8)
1.
2.
3.
Remove the 2 screws
1
.
Remove the 3 screws
2
.
Remove the Deflection PCB in the direction of arrow.
Fig. 1-8
Deflection PCB
1
1
Bottom Plate
2
2
2
Fig. 1-7
1
(A)
Angle Deck
2
(B)
(C)
3
DVD PCB
Pick Up PCB
1
1
DVD Top
2
2
2
Make the short circuit
using a soldering.
3
3
3
DVD Deck
1-5: VCR PCB (Refer to Fig. 1-5)
1.
2.
3.
4.
5.
Remove the 6 screws
1
.
Remove the screw
2
.
Remove the AV Jack Shield.
Disconnect the following connectors:
(CP001, CP604, CP602B, CP2201, CP8001 and CP8002).
Remove the VCR PCB in the direction of arrow.
Fig. 1-5
1
1
1
1
1
1
2
VCR PCB
Bottom Plate
AV Jack Shield
