ELECTRICAL ADJUSTMENTS
2-18: WHITE BALANCE
NOTE: Adjust after performing CUT OFF adjustment.
Place the set with Aging Test for more than 15 minutes.
Receive the color bar pattern.
Using the remote control, set the brightness and contrast
to normal position.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (2) on the remote control to
select the "AKB". The Fig. 2-8 appears on the display.
Press the channel button (2) on the remote control to
select the "R.BIAS".
Using the VOL. UP or DOWN button on the remote
control to adjust the R.BIAS.
Press the CH. UP or DOWN button on the remote control
to select the "G.BIAS", "B.BIAS", "R.DRIVE", "G.DRIVE"
or "B.DRIVE".
Using the VOL. UP or DOWN button on the remote
control to adjust the G.BIAS, B.BIAS, R.DRIVE, G.DRIVE
or B.DRIVE.
Perform the above adjustments 7 and 8 until the white
color is looked like a white.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1. AKB AUTO
2. R.BIAS
3. G.BIAS
4. B.BIAS
5. R.DRIVE
6. G.DRIVE
7. B.DRIVE
8. AGC AUTO 0. RETURN
Fig. 2-8
