DISASSEMBLY INSTRUCTIONS
2-19: LOADING GEAR S/T ASS'Y (Refer to Fig. 2-19-A)
1.
2.
3.
4.
5.
6.
7.
8.
9.
Remove the E-Ring
1
and remove the Main Loading
Gear.
Remove the Capstan Brake Spring.
Slide the Main Rod and remove the Spring Holder.
Remove the Main Rod, Tension Lever, Clutch Actuator,
Idler Arm Ass'y.
Remove the screw
2
.
Remove the LED Reflecter.
Remove the Loading Arm S Ass'y and Loading Arm T
Ass'y.
Remove the Loading Gear S and Loading Gear T.
Remove the Loading Gear Spring.
2. When you install the Clutch Actuator, install as shown in
the circle of Fig. 2-19-C. (Refer to Fig. 2-19-C)
Fig. 2-19-C
Clutch Actuator
2-20: INCLINED S/T ASS'Y (Refer to Fig. 2-20)
Remove the Cap P4.
Remove the screw
1
.
Unlock the support
2
and remove the Loading Gear
Holder.
Remove the Inclined S Unit.
Remove the Inclined T Unit.
1.
2.
3.
4.
5.
1
2
Main Rod
Main Loading Gear
Tension Lever
Loading Gear T
Loading Gear
Spring
Loading Arm T Ass'y
Loading Gear
Spring
LED Reflecter
Idler Arm Ass'y
Clutch Actuator
• Screw Torque: 5
±
0.5kgf•cm
Fig. 2-19-A
NOTES
Loading Arm T Ass'y
Main Loading Gear
Marker
Marker
Loading Arm S Ass'y
1. When you install the Loading Arm S Ass'y, Loading Arm
T Ass'y and Main Loading Gear, align each marker.
(Refer to Fig. 2-19-B)
Fig. 2-19-B
Capstan Brake Spring
Spring Holder
Loading Arm S Ass'y
Loading Gear S
NOTE
Do not touch the roller of Guide Roller.
Fig. 2-20
Inclined T Unit
Cap P4
• Screw Torque: 2.5
±
0.5kgf•cm
Inclined S Unit
Loading Gear Holder
1
2
