Toshiba MMY-MUP0801HT8JP-E, Owner'S Manual

Page: 12 / 20

6
Louver direction
NOTE
To improve the cooling / heating performance, change
the louver angle for each operation.
The characteristics of air: Cool air falls, and warm
air rises.
CAUTION
Point the louver horizontally during cooling
If pointing downward for cooling, dew may form on the
surface of the air discharge or louver and may drop
down.
NOTE
• If pointing horizontally for cooling, dew may form on
the surface of the cabinet or louver and may drop
down.
• If pointing horizontally for heating, the room
temperature may be uneven.
• Do not handle the louver manually.
• Doing so may cause a failure.
• Use the remote controller to adjust the angle.
‹
To set the louver direction and
auto swing
1
Push the Menu button several times and select
the wind direction mode to blink the wind direction.
Then, push the setting button several times to
display the louver direction as shown in the
fi gure
below.
• If you do not push any button for 30s, the wind
direction mode fi nishes.
T
For heating
The louver can be adjusted to six steps.
Point the louver downward. If not pointing
downward, hot air may not reach the
fl oor.
Initial (1) (2) (3) (4) (5) (6)
Swing
Operation mode Available directions
HEAT, FAN (1) (2) (3) (4) (5) (6)
T
For cooling
The louver can be adjusted to four steps.
Point the louver horizontally. If pointing downward,
dew may form on the surface of the air discharge
port and may drop down.
Initial (1) (2) (3) (4)
Swing
Operation mode Available directions
COOL, DRY, (1) (2) (3) (4)
T
For fan
The louver can be adjusted to six steps.
Select a wind direction.
■
Auto swing
The SWING indicator is displayed and the
louver begins swinging.
Repeat
■
4-way cassette type
T
When cooling
Point the louver horizontally.
T
When heating
Point the louver downward.
• The louver automatically closes when running is
stopped.
• In pre-heating mode, the louver points upward.
The swing indication appears on the remote
controller even in pre-heating mode, but the actual
swing starts only after pre-heating is complete.
■
2-way cassette type
T
When cooling
Point the louver horizontally to send cool air across the
entire room.
T
When heating
Point the louver downward to send heated air to the
fl oor.
■
1-way cassette type
(SH series)
T
When cooling
Point the louver horizontally to send cool air across the
entire room.
T
When heating
Point the louver downward to send heated air to the
fl oor.
• The louver automatically closes when running is
stopped.
• In pre-heating mode, the louver points upward.
The swing indication appears on the remote
controller even in pre-heating mode, but the actual
swing starts only after pre-heating is complete.
– 11 –
21-EN 22-EN