SMMS High-Wall Type
Owner’s Manual
– 19 –
Timer operation
Use the wired remote controller for timer setting if it
is also in use.
ON timer and OFF timer
Setting TIMER
1
ON / OFF TIMER button
Push the ON or OFF TIMER buttons as required.
• The previous timer setting is displayed and flashes
along with ON / OFF timer display.
2
TIMER
button
Push the TIMER
button.
Set the timer to the desired time.
Each push of the TIMER button changes the time in
ten minute steps.
Pushing the TIMER button continually changes the
time in one hour step.
3
SET
SET
button
Push the SET
SET
button to set the timer.
The timer time is indicated and the timer starts.
Cancelling TIMER
4
CLR
CLR
button
Push the CLR
CLR
button to cancel the timer setting.
CAUTION
• When the timer operation is selected, the
remote controller automatically transmits the
timer signal to the indoor unit at the specified
time. Therefore, keep the remote controller in a
location where it can transmit the signal to the
indoor unit properly. Otherwise, the time lag of
up to 15 minutes will occur.
• If the SET
SET
button is not pushed within 30
seconds after setting the time, the setting will
be cancelled.
PRESET
FAN
MODE
Hi-POWER
ON
OFF
SET
CLR
ECO
AUTO
TIMER
CLOCK CHECK
RESET
FILTER
START/STOP
FIX
MEMO
SWING
1
2
3
4
19-EN
High-Wall Type
