Toshiba MMF-UP0151H-E, Installation Manual

Page: 9 / 30

– 8 –
 Installation space
(Unit: mm)
Reserve sufficient space required for installation or service work.
REQUIREMENT
When using the air conditioner under condition of high humidity, attach the heat insulator to the side face and the rear
side of the indoor unit.
200 or
more
50 or more*1
10
00
o
r
mo
re
Front side
Front side
50 or more
*1 For right direction piping, take a space 200 mm or more.
4
Installation
CAUTION
Strictly comply with the following rules to prevent damage of the indoor units and human injury.
• Do not put any heavy article on the indoor unit or let a person get on it. (Even units are packaged)
• Carry in the indoor unit as it is packaged if possible. If carrying in the indoor unit unpacked by necessity, use buffering
cloth or other material not to damage the unit.
• Carry the package by four or more persons, and do not bundle it with plastic band at positions other than specified.
• Be sure to take measures to prevent falling at the wall surface and the floor and fix it surely considering prevention
of accident of falling because this unit is formed into a thin type. If it is not fixed, a falling accident may occur.
• After carrying in the indoor unit to the specified place, fix it to the wall and the floor immediately for safety.
 To open the intake grille
The intake grille is fixed by the screws for safety reasons. Use a screwdriver to unfasten the screws of the intake
grille (two places) to open the intake grille. The screws are designed to stay on the intake grille.
Screw
15-EN 16-EN