– 7 –
CAUTION
This Air Conditioner has adopted a refrigerant HFC
(R32 or R410A) which does not destroy the ozone layer.
• As the R32 or R410A refrigerant is easily affected by impurities
such as moisture, oxidized
fi
lm, oil, etc., due to the high
pressure, be careful not to allow the moisture, dirt, existing
refrigerant, refrigerating machine oil, etc., to get mixed up in the
refrigeration cycle during the installation work.
• A special tool for the R32 or R410A refrigerant is required for
installation.
• Use a new and clean piping materials for the connecting pipe
so that moisture and dirt are not mixed together during the
installation work.
• When using existing pipes, follow the Installation Manual
enclosed with the outdoor unit.
To disconnect the appliance from main power supply.
• This appliance must be connected to the main power supply by
means of a switch with a contact separation of at least 3 mm.
The installation fuse (all types can be used) must be used for
the power supply line of this conditioner.
(*1) Refer to the “Definition of Qualified Installer or Qualified
Service Person.”
2
Accessory parts
Accessory parts
Part name
Q’ty
Shape
Usage
Installation Manual
1
This manual
(Hand over to customers)
(For other languages that do not appear in this Installation
Manual, please refer to the enclosed CD-R.)
CD-ROM
1
—
Installation Manual
Heat insulating pipe
2
(200×200×6t)
For heat insulation of gas pipe and liquid pipe connecting section
Washer
8
For hanging-down unit
Hose band
1
For connecting drain pipe
Flexible hose
1
For adjusting center of drain pipe
Heat insulator
1
(220×300×10t)
For heat insulation of drain connecting section
Seal material
3
(45×45×3t)
For sealing of wire connecting port
13-EN
14-EN
