4
MMD-AP___4H2UL
E15-3H1
MMD-AP0724H2UL, MMD-AP0964H2UL
54.3"(1380)
3.9"
(100)
49.6"(1260) Hanging bolt mounting pitch
50.7"(1288) Hanging bolt mounting pitch
52.3"(1328)
Electric parts box
Hole for hanging bolt
(4-Ø1/2"(12)×3.6"(92))
Air discharge port
0.9"(22)
2.6"(65)
1.8"(46)
Air suction port
1.8"(45)
18.5"(470)
7.9"
(200)
5.9"
(150)
1.2"
(31)
24.6"(624)
27.5"(698)
Drain pipe connecting port(V25)
Taper screw for R1,1"(25.4) pipes
(Gas side Ø7/8"(22.2) Brazed)
Refrigerant pipe connecting port
49.2"(1250)
(Liquid side Ø1/2"(12.7) Flared)
Refrigerant pipe connecting port
1.8"(45)
2.6"×16=40.9"(65×16=1040)
2.6"(65)
0.6"(15)
Screw hole for duct mounting(17-M5)
0.6"(15)
0.4"(9.5)
2.6"(65)
2.6"×5=12.8"
(65×5=325)
Screw hole for duct mounting
(6-M5)
1"(25)
2.6"×5=12.8"
(65×5=325)
2.6"(65)
Screw hole for duct mounting
(6-M5)
1.8"
(45)
2.6"×16=40.9"(65×16=1040)
2.6"(65)
Screw hole for duct mounting(17-M5)
0.6"(15)
0.6"(15)
42.6"(1083) Outside
13.7"(347)
Outside
42.6"(1083) Outside
15.1"(383)
Outside
1"(25)
1"(25)
1"(25)
1"(25)
<Note>
1. Indoor unit does not have air filter its inside.
So be sure to set an air filter (local
arrangements) in the position maintained
easily such as a suction grills.
(If there is no air filter, dusts are blocked in the
air heat exchanger and it may cause failure or
water leak in air-conditioner.)
2. Leave sufficient space to remove the air filter
when you attach it.
Attention
Be sure to set the plug and to make it to be able to cleaning,
because garbage in drain piping piles up easily in drain trap.
23.6"(600)
Check port
Space required for installation or service work
Check port
7.9"(200)
Service
space
or more
39.4"(1000)
Distance from building
space
Service
(200)
7.9"
or more
(Check and cleaning port)
Check panel
Plug
3.9"(100)
or more
2"(50)
or more
5.9"(150) or more
Z view
3.6"(91.5)
7.8"(198.5)
and remote control wiring
Ø1"(26) Hole for control wire
Ø7/8"(22.2) Hole for power supply cable
1.7"
(42)
Unit: in (mm)
+00E15-3H1_01EN.book Page 4 Tuesday, March 22, 2016 5:50 PM