DISASSEMBLY INSTRUCTIONS
B1-1
1
Front Cabinet
Plate Bottom Holder
AV PCB/DVD Block
2
1. REMOVAL OF MECHANICAL PARTS
AND P.C. BOARDS
1-1: BACK CABINET (Refer to Fig. 1-1)
1.
2.
3.
Remove the 6 screws
1
.
Remove the 2 screws
2
which are used for holding the
Back Cabinet.
Remove the Back Cabinet in the direction of arrow.
1-3: AV PCB/DVD BLOCK (Refer to Fig. 1-3)
1.
2.
3.
4.
5.
Unlock the support
1
.
Remove the Plate Bottom Holder.
Remove the screw
2
.
Disconnect the following connectors:
(CP303, CP404 and CP3800).
Remove the AV PCB/DVD Block in the direction of arrow.
1-2: CRT PCB (Refer to Fig. 1-2)
CAUTION: BEFORE REMOVING THE ANODE CAP,
DISCHARGE ELECTRICITY BECAUSE IT
CONTAINS HIGH VOLTAGE.
BEFORE ATTEMPTING TO REMOVE OR
REPAIR ANY PCB, UNPLUG THE POWER
CORD FROM THE AC SOURCE.
1.
2.
3.
Remove the Anode Cap.
(Refer to REMOVAL OF ANODE CAP)
Disconnect the following connector:
(CP801).
Remove the CRT PCB in the direction of arrow.
CRT PCB
Front Cabinet
Fig. 1-1
Fig. 1-2
Front Cabinet
1
2
Back Cabinet
1
1
1
1
1
2
Fig. 1-3
1.
2.
3.
Disconnect the following connectors:
(CP8001 and CP8002).
Remove the 4 screws
1
.
Remove the DVD Block in the direction of arrow.
1-4: DVD BLOCK (Refer to Fig. 1-4)
1
DVD Block
AV PCB
Fig. 1-4
1
1
1
CP801
CP303
CP3800
CP404
CP8001
CP8002