42
Function setup
Parental control setting
Some discs are specified not suitable for children.
Such discs can be limited not to play back with the unit.
1) Press
C
or
D
to select “Parental”, then press
B
or
A
until the level you require appears.
• Level Off: The parental control setting does not
function.
• Level 8:
All DVD software can be played back.
• Level 1:
DVD software for adults cannot be
played back.
Select from the level 1 to level 8. The limitation will
be more severe as the level number is lower.
2) Press
C
or
D
to select “Password”.
Press
Number buttons (0–9)
to input a 4-digit
password. Be sure to remember this number!
• If you input a wrong number, press
CANCEL
.
3) Press
ENTER
to store the password.
Note: Now the rating is locked and the setting can
not be changed unless you enter the correct pass
word.
4) Press
OPEN
/
CLOSE
to activate Parental control
setting. (See “Temporary disabling of rating level
by DVD disc” on page 43.)
Notes:
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
Password
Parental
Off
/0Ð9/Enter/Cancel/Setup/Return
----
Note:
If each setup (pages 40~42) has been completed, the unit
can always be worked under the same conditions (espe-
cially with DVD discs).
Each setup will be retained in the memory even if you turn
the power off.
To change the parental level
1) Press
C
or
D
to select “Password”.
2) Press
Number buttons (0–9)
to enter the password
you have stored.
3) Press
ENTER
.
• The rating is now unlocked.
4) Press
C
or
D
to select “Parental”, then press
B
or
A
to change the parental level.
5) Press
C
or
D
to select “Password”, then press
Number buttons (0–9)
to enter the password.
Note: You can change the password if you want.
6) Press
ENTER
.
Now the parental level is changed and locked.
If you forget the password...
1. Press
OPEN/CLOSE
to open the disc tray.
2. Remove the disc.
3. Press
OPEN/CLOSE
again to close the disc tray.
“No Disc” appears on the screen.
4. While holding
STOP
down on the front panel, press
7
on the remote control. “PASSWORD CLEAR”
appears on the screen.
5. Enter a new password again.
Customizing the function settings (continued)
Setting details
5R80201A [E] (P38-43)
12/27/04, 5:03 PM
42
