Toshiba KV-7168A Instruction Manual Download Page 27

Page: 27 / 52

RECORDING

OPERATION

PREPARATION

INTRODUCTION

PLAYBACK

OPERATION

NOTICE

Press the

SHIFT

button to blink end time.
Set end time to 17:00
with the SET button and
the

SHIFT button in

the same manner as 6.

Press the DISPLAY
button twice to erase the
MENU screen.

Press the TIMER button.

Press the

SHIFT

button and the + SET
button to set recording
time mode to A24H.

REC

TIMER

DISPLAY

TIME MODE

SET

SHIFT

TRACKING

LOCATION SELECT

–

TIMER

DISPLAY

TIME MODE

SET

SHIFT

TRACKING

LOCATION SELECT

–

DISPLAY

TIME MODE

SET

SHIFT

TRACKING

LOCATION SELECT

–

The power goes off and the TIMER display lights in the
VCR display.

Recording starts at the programmed start time.

Notes:

If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.

To cancel the timer recording, press the POWER button or
the TIMER button.

The time difference between start time and end time
should be more than 1 minute. If they are same, timer
recording doesn’t work.

The accuracy of the time display depends on the condi-
tions of use and the environment. Set clock to the exact
time by daily check.

During timer power off mode, alarm recording will not
operate at all.

During the 12 hour display, the display appears as follows.

The

TIME MODE button is pressed, the display

changes as follows.
120H

→

168H

→

L01

→

L02

→

L03

→

A12

→

A18

→

A24

→

120

The

TIME MODE button is pressed, the display

changes in the reverse direction.

IF A POWER FAILURE SHOULD OCCUR

If a power failure occurs, the PW.FAIL display appears
in the VCR display. To erase this display press one of
the operations buttons.

If the power failure is recovered within 10 days, and the
battery is charged continuously for more than 48 hours
in the ambient temperature, the date/time data and
timer recording programs remain in the memory.

SU2 ON --:-- --:-- 120H

SU1 ON --:-- --:-- 120H

SA2 ON --:-- --:-- 120H

SA1 ON --:-- --:-- 120H

DLY ON 8:30 --:-- 120H

PROGRAM

FR1 ON --:-- --:-- 120H

MENU=[DISPLAY]

FR2 ON --:-- --:-- 120H

➜

SU2 ON --:-- --:-- 120H

SU1 ON --:-- --:-- 120H

SA2 ON --:-- --:-- 120H

SA1 ON --:-- --:-- 120H

DLY ON 8:30 17:30 120H

PROGRAM

FR1 ON --:-- --:-- 120H

MENU=[DISPLAY]

FR2 ON --:-- --:-- 120H

➜

SU2 ON --:-- --:-- 120H

SU1 ON --:-- --:-- 120H

SA2 ON --:-- --:-- 120H

SA1 ON --:-- --:-- 120H

DLY ON 8:30 17:00 120H

PROGRAM

FR1 ON --:-- --:-- 120H

MENU=[DISPLAY]

FR2 ON --:-- --:-- 120H

➜

SU2 ON --:-- --:-- 120H

SU1 ON --:-- --:-- 120H

SA2 ON --:-- --:-- 120H

SA1 ON --:-- --:-- 120H

DLY ON 8:30 17:00 120H

PROGRAM

FR1 ON --:-- --:-- 120H

MENU=[DISPLAY]

FR2 ON --:-- --:-- 120H

➜

SU2 ON -:--- -:--- 120H

SU1 ON -:--- -:--- 120H

SA2 ON -:--- -:--- 120H

SA1 ON -:--- -:--- 120H

DLY ON -:--- -:--- 120H

PROGRAM

FR1 ON -:--- -:--- 120H

MENU=[DISPLAY]

FR2 ON -:--- -:--- 120H

➜

17:30:02 A 2

8/28/96 WED

Summary of Contents for KV-7168A





















































Search results

Summary of Contents for KV-7168A

Reviews:

Related manuals for KV-7168A

Brands by name

Popular brands

Toshiba KV-7168A, Instruction Manual

Search results

Summary of Contents for KV-7168A

Reviews:

Related manuals for KV-7168A

Brands by name

Popular brands