Toshiba IP4100 Series, User Manual

Page: 24 / 36

IP edge & Strata CIX
Getting Started
12 TOSHIBA IP4000-series UG November, 2011
Audio Screen
Change the Ringer tone and Volume.
Handset name Change the name the handset displays on the standby screen.
Reset settings Reset all the options on this handset to factory default values (see “Resetting
Handsets” on page 23 )
Status The status screen displays the following information (you will have to scroll
down to see all the fields):
The IP address, MAC address, and system name of the base this handset is
registered to.
The hardware version and software version of the base this handset is regis-
tered to.
The hardware version and the software version of this handset.
The current band DECT radio band the handset is operating in.
The handset's battery level.
The handset's IPEI.
Auto Answer Choose how you want the handset to answer incoming calls:
Normal (default): you must press
Talk
to answer calls.
Any key: you can press any key to answer calls.
Automatic: the handset answers all calls after 5 seconds.
Silent charging Choose how the handset responds to incoming calls while it is charging:
Off: The handset rings normally and displays the incoming call screen.
Disconnected: The handset does not respond to incoming calls at all.
Silent: The handset does not ring, but it does display the incoming call screen.
Do not disturb Turn on the Do Not Disturb feature. See page 19 for more information.
Ring Volume Set the ringer volume. Press
Up
to raise the volume and
Down
to lower the
volume. Press
Select
or
OK
when you’re satisfied with the volume setting.
Ring Melody Choose this handset's ring melody. As you highlight each ring melody, press
Play
to hear a sample. When you hear the melody you want, press Select.
Alert Volume Set the volume for notification tones. Press
Up
to raise the volume and
Down
to lower the volume. Press Select or
OK
when you’re satisfied with the
volume setting.
Alert tone Choose the tone this handset uses for alerts and notifications. As you high-
light each tone, press
Play
to hear a sample. When you hear the tone you
want, press
Select
.
Vibrator Have the handset vibrate on an incoming call or a notification. Select one of
the following:
• Off: The handset will not vibrate at all.
• Vibrate then ring: The handset will vibrate first, then sound the tone or
melody on the second ring.
• Vibrate only: The handset will only vibrate, not ring.
• Vibrate and ring: The handset will vibrate and ring at the same time.