Toshiba IP EDGE User Manual Download Page 70

Page: 70 / 242

edge

Messaging Features

TOSHIBA

IPedge UG 11/11

•

To call the number and delete the message, press

•

To call the number and save the message, press

•

To call the number and keep the message as new, press

3. The system will place you on hold while it transfers your call.

Redirect a Message

During message playback or after the message has finished playing, you can
redirect (forward) a message to another subscriber’s voicemail box.

1. Press

while listening to a message or after the message has finished

playing.

2. The system will prompt you to enter the mailbox to which you wish to

forward the message. You can also use a private or public group
distribution list at this time.
See

Chapter 5 – Using Group Distributions

for more information on

setting up and using group distribution lists.

3. After you have made your selection, press

to confirm or

to change.

4. Press

to send without a comment, or

to attach a comment to the

beginning of the message. You can send the message with normal
delivery, return receipt and/or priority; see

Chapter 3 – Sending

Messages

to learn about these delivery options.

5. The message is now sent. Press

to continue,

to send to additional

destinations, or

to additional destinations with the same comment.

Summary of Contents for IP EDGE



















































































































































































































































Search results

Summary of Contents for IP EDGE

Reviews:

Related manuals for IP EDGE

Brands by name

Popular brands

Toshiba IP EDGE, User Manual

Search results

Summary of Contents for IP EDGE

Reviews:

Related manuals for IP EDGE

Brands by name

Popular brands