- 34 -
（
（（
（
4
．
．
．
．
7
）
））
）
Changing master pedestal
①
Set the “
→
” to M. PED by pushing [MENU UP], [MENU DOWN] buttons.
②
Set the master pedestal by pushing [DATA UP], [DATA DOWN] buttons.
［
DATA UP
］
M PED rises
－
50 0 50
M PED decreases
［
DATA DOWN
］
* When DTL OUT ON is selected in OPTION menu, the display M. PED turns off automatically.
So the M. PED change cannot be performed.
-- 4 PROCESS -- <FILE A> -- 4 PROCESS -- <FILE A>
→
GAMMA ON/OFF
ON
→
GAMMA ON/OFF
OFF
GAMMA
0 DTL B
．
FRQ NORMAL
BLACK GAMMA
NORMAL
CHROMA GAIN
0
DTL B
．
FRQ
NORMAL
DNR
OFF
CHROMA GAIN
0
DNR
OFF
Menu when DTL OUT ON is selected in OPTION menu.
（
（（
（
4
．
．
．
．
8
）
））
）
Changing CHROMA GAIN
①
Set the “
→
” to CHROMA GAIN by pushing [MENU UP], [MENU DOWN] buttons.
②
Set the chroma gain by pushing [DATA UP], [DATA DOWN] buttons.
［
DATA UP
］
Chroma gain increases.
－
128 0 127
Chroma gain increases.
［
DATA DOWN
］
Note:
The chroma gain setting is only valid for VBS output signals and Y/C output signals. It is not valid for
the RGB output in the RGB terminal, the Y/P
R
/P
B
outputs or the DIGITAL terminal’s digital output
signals.
（
（（
（
4
．
．
．
．
9
）
））
）
Changing DNR (Digital Noise Reduction)
①
Set the “
→
” to DNR by pushing [MENU UP], [MENU DOWN] buttons.
②
Select either ON or OFF by pushing [DATA UP], [DATA DOWN] buttons.
Note:
When DNR is set to ON, noise is reduced, but the resolution decreases slightly.
