28
1P SR (1 Pulse Trigger Sync Reset)
( 2 )
#HARGEBEGINSTOACCUMULATEAFTERTHETRIGGERINPUTTO##OFTHE$)')4!,TERMINALTHEVERTICALSYNCSIGNALISRESET
and frame images are output.
1 Pulse Trigger SYNC-RESET Picture Output Timing
(2. 1)
About 1
m
s
Exposure completion
0 to 1H*
3
Exposure period*
2
Trigger*
1
Negative polarity mode
Positive polarity mode
(Internal VD)
FVAL
RGB data
(video interval image)
LVAL,
DVAL
20H (Partial scanning/binning OFF)
10H (Partial scanning 93fps)
12H (Partial scanning 121fps)
12H (Partial scanning 126fps)
14H (Partial scanning 174fps)
14H (Partial scanning 199fps)
15H (Partial scanning 250fps)
14H (binning)
*
4
*1: External input signal
*2: Exposure time is determined by the setting of “7. 2 (1.3) Changing each setting in E.TRG mode”.
6$ISGENERATEDAFTERTO(FOLLOWINGTHECOMPLETIONOFTHEEXPOSUREPERIODANDTHEVIDEOISSYNCHRONIZEDTO
this and output.
*4: When NR is set to ON, 1H is increased.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trigger, there
will be an effect on the video.
Summary of Contents for IK-TF5P2
Page 39: ...39 ...
