manualshive.com logo in svg

Toshiba IK-HD3D, Instruction Manual

Share
Download
Toshiba IK-HD3D Instruction Manual Download Page 30

30

Setting USER area

( 9 ) 

s7HEN53%2ISSELECTEDFORTHE!2%!OFTHEAUTOMATICSHUTTERORFOR!7"THELIGHTMEASUREMENTZONESCANBE

changed.

s4HE53%2AREAISCOMPOSEDOFZONESWITHVERTICAL XHORIZONTAL AREASANDEACHAREACANBESETTO/.

OFF.

 Set the output to area menu. 

/I

Set the output to the area menu by referring to the item “7.2 (1.1) (e) Confirming the contents of the 
measurement light area selected by automatic shutter” and “7.2 (3.1) (e) Confirming the contents of the 
measurement light area selected by AWB”.

Cursor

 Move the cursor to the zone to be appeared. 

0I

4HECURSORMOVESUPDOWNRIGHTANDLEFTBYPUSHINGTHE;-%.550=;-%.5$/7.=;$!4!50=;$!4!
$/7.=BUTTONS

[MENU UP]

Move to up

Move to down

[MENU DOWN]

Move to left [DATA DOWN]

[DATA UP] Move to right

 Select ON/OFF for the zone. 

1I

3ELECT/.EFFECTIVE OR/&&INEFFECTIVE BYPUSHINGTHE;0!'%=BUTTON

 

When ON is selected, the selected area will be displayed brightly, and when OFF is selected, it will be dimmed.

0USH;$)30=BUTTONTORETURNTOTHEMENU

2I

Note:

OFF can not be selected for all 64 zones because the automatic shutter function and AWB function do not 
perform correctly. (“AREA NG NOT AVAILABLE” displays.)

Summary of Contents for IK-HD3D





































Reviews:

No comments

Brands by name

Popular brands

Load more brands