manualshive.com logo in svg

Toshiba IK-HD1D, Instruction Manual, Page: 17 / 35

Share
Download
Toshiba IK-HD1D Instruction Manual Download Page 17

17

䊶

 Select the menu to change the setting by referring to the item “7.1 Using the Menus”.

䊶

 When the [MENU UP], [MENU DOWN] buttons are pushed, the “

㸢

” on the screen moves up and down. 

Move the “

㸢

” to the item whose setting you wish to change. 

 1    SHUTTER

䋨䋨

Electronic shutter

䋩

The electronic shutter has four modes; AUTO, MANUAL, SS(Synchro. Scan).

Press the “Page” button to enter the Shutter Page. Use the “Data Up/Down” buttons to select the Shutter 

Mode.

          AUTO 

MANUAL 

SS

AUTO 

䋺

  The exposure time is controlled automatically to obtain the video level set. 

MANUAL

䋺

 It is possible to select the exposure time from eleven speed settings; OFF (1/60s), 1/100s,

 

1/125s, 1/250s, 1/500s, 1/1000s, 1/3000s, 1/5000s, 1/10000s, 1/30000s, 1/50000s. 

Note: 

When setting a rapid shutter speed, sensitivity degrades according to the speed. 

When a discharging light such as fluorescent lamp, etc. is used for the illumination, 

the flicker may be large.

SS

䋺

  Shutter speed can be set by the horizontal scanning time (1H) unit.

7

2  Menus 

IK-HD1D̲EN.indd   17

IK-HD1D̲EN.indd   17

2008/04/16   17:53:36

2008/04/16   17:53:36

Summary of Contents for IK-HD1D




































Reviews:

No comments