Toshiba HX7+ ASD, Installation & Operation Manual

Page: 243 / 257

234 HX7+ ASD Installation and Operation Manual
HX7+ ASD Optional Devices
The HX7+ ASD may be equipped with several options which are used to expand the functionality of the
ASD. Table 28 lists the available options and their functions.
Table 28. HX7+ ASD Optional devices and functions.
Item Device Function
ASD7-SIM2 Emulates the input control signals of the HX7+ ASD via switches and pots.
ASD-BPC Provides dust protection for the HX7+ ASD when the keypad is removed or mounted remotely.
ASD-CAB-PC Female 9-pin d-type to RJ-45 (PC to ASD cable).
ASD-ISO-1
Provides isolation of the Control Board output circuit from the AM / FM output and from the II
input.
ASD-TB1-AC1 Provides 120 VAC discrete input terminal activation and additional I/O terminals.
HS35 Encoder
Provides rotational speed and/or directional information. The Encoder is mounted on the motor
shaft or the shaft-driven equipment.
ASD – Multicom Option Board
Note: Multicom boards are identified as ASD-Multicom-A, -B, -F, etc.
-A
Incorporates the Modbus , Profibus , or Device Net communications protocol for system control
and is able to receive and process Vector Control feedback.
-B Provides a line driver and open collector interface for system control.
-F
The Tosline-F10 interface provides high-speed communication to Toshiba control equipment via
twisted pair wiring.
-J Able to receive and process vector control feedback via line driver or open collector interface.
-S
The Tosline-S20 interface provides high-speed communication to Toshiba control equipment via
fiber optics.
-X Provides extended terminal I/O functions for monitoring, feedback, and control.
Note: See the user manual of the applicable option for further information on each item.
tion Card
ASD-
Multicom
Option Board