– 1 –
Air to Water Heat Pump
Installation Manual
Original instruction
▼
HWS-805H-E, HWS-1105H-E, HWS-1405H-E
▼
HWS-1105H8-E, HWS-1105H8R-E
HWS-1405H8-E, HWS-1405H8R-E
HWS-1605H8-E, HWS-1605H8R-E
Please read this Installation Manual carefully before installing the Air to Water Heat Pump.
• This Manual describes the installation method of the outdoor unit.
• For installation of the hydro unit, follow the Installation Manual attached to the hydro unit.
REFRIGERANT
This Air to water heat pump uses an HFC refrigerant (R410A) in order to prevent destruction of the ozone layer.
Equipment complying with IEC 610003-12.
This equipment complies with IEC 61000-3-12 provided that the short-circuit power Ssc is greater than or equal to
Ssc (*1) at the interface point between the user’s supply and the public system. It is the responsibility of the installer
or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the
equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to Ssc (*1).
Furthermore, when similar equipment or other equipment which may cause harmonic current emissions are to be
connected to the same interface point with this equipment, to reduce the risk of possible problems which may be
caused from addition of those harmonic current emissions, it is recommended to make sure that the short-circuit
power Ssc at the interface point is greater than the sum of the minimum Ssc required by all the equipment which
will be connected to the interface point.
Ssc (*1)
Model
Ssc (MVA)
HWS-1105H8-E, HWS-1105H8R-E
0.71
HWS-1405H8-E, HWS-1405H8R-E
0.71
HWS-1605H8-E, HWS-1605H8R-E
0.71
1-EN
Summary of Contents for HWS-1105H-E
Page 29: ...EF99811701 ...
