channel will be shown.
x
x
When you see the message “>>> SCAN
COMPLETE <<<”, you have completed
tuning your receiver. If no channel is found,
please refer to “TROUBLESHOOTING” in
Appendix 2.
Press the “EXIT” button several times to
leave the Main Menu.
Note: The frequencies of the “quick scan”
channels are preset in the receiver’s
database. In case that the local TV station
changes the channel frequency or a new
channel comes up, you have to scan these
channels using “MANUAL SETUP”.
AUTO SCAN (For Australia Only)
The steps required to automatically program the receiver are outlined as below:
x
x
x
x
Highlight “AUTO SCAN” and press the
“ENTER” button to start channel search.
The receiver starts scanning from channel 2
to channel 69. The status bar shows the
progress being made.
Once a digital TV channel is found, the
channel number and program name will be
shown.
When you see the message “>>> SCAN
COMPLETE <<<”, you have completed
tuning your receiver. If no channel is found,
please refer to “TROUBLESHOOTING” in
Appendix 2.
x
Press the “EXIT” button several times to
leave the Main Menu.
Note: Auto scan process may take about 18
minutes to complete.
MANUAL SETUP
x
On the “INSTALLATION” page, highlight
“MANUAL SETUP” and press the “ENTER”
button.
x
Select channel number. Be sure you know
the channel number and its RF frequency.
You may refer to Digital TV channel table in
Appendix 1.
x
Press “” button to highlight “Frequency”,
“Bandwidth” and “Priority” to make sure the
parameters are correct, then press “”
button to highlight “Start Scan” and press the
26
Summary of Contents for HD-S25
Page 10: ...10 ...
Page 51: ...APPENDICES APPENDIX 3 PARENTAL GUIDANCE CODES 51 ...
Page 56: ...56 2004 Toshiba Corporation Printed in Taiwan ...
