background image

- Please configure the Ethernet port. You may need to turn on DHCP and DNS.

- After you have configured the Ethernet port, follow the directions in the owner’s manual to check for a
firmware update.

- If a firmware update is available for your player, it will take about 30 - 60 minutes to download and
install. 

When the later version of FW is available for your player, then: 

1. A message will appear and the firmware update will automatically start. 

2. When the firmware update is completed, the player will automatically turn itself off. 

In case of model: HD-XE1: 

Please also follow steps 3 through 6

3. Power up the player again. 

4. The player will display a message that another update will start.

5. Read the message and press OK. The message will disappear, and the second firmware update will
automatically start. Please be patient during this process. (During the update, "VERUP" will flash on the
display of the player.) 

6. When the firmware update is completed, the player will automatically turn itself off.

- DO NOT UNPLUG, TURN OFF, OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE
FIRMWARE UPDATE PROCESS. Doing so will cause the writing of the firmware update to the player to
be halted and the player may no longer operate properly. If the player stops working, please contact
Toshiba Customer Service for your country. 

- If no firmware update is available, the player will quickly exit the firmware update process.

- Please refer to the owner's manual and Update Procedure sheet for additional details. 

2. If you have a PC with a CD-RW drive that is connected to the internet 

You may be able to download an ISO image file of the firmware update to your PC and copy it to a
blank CD-R or CD-RW disc. For more information, and to download an ISO image file of the firmware
update "click here" (English Language Site). 

3. If you are unable, or prefer not to obtain the firmware update by one of the
methods described above

You may contact Toshiba Customer Service for your country and request that a firmware update disc
be sent to you by mail.

Summary of Contents for HD-E1

Page 1: ...HDMI DVI related issues identified by Toshiba Important Note Certain HD DVD discs may contain or have the capability of downloading studio provided web enabled network content To minimize any potential compatibility and or connectivity issues before viewing such content it is recommended that you perform the firmware update process to ensure that your HD DVD player is using the latest firmware ver...

Page 2: ...hen the firmware update is completed the player will automatically turn itself off DO NOT UNPLUG TURN OFF OR USE ANY OTHER FEATURE OF YOUR PLAYER DURING THE FIRMWARE UPDATE PROCESS Doing so will cause the writing of the firmware update to the player to be halted and the player may no longer operate properly If the player stops working please contact Toshiba Customer Service for your country If no ...

Page 3: ...es certain disc playback and HDMI DVI related issues identified by Toshiba Q2 Why do I need to turn on DHCP and DNS A2 Turning on DHCP causes the player to automatically detect its IP address and other network information from your internet service provider s DHCP server Turning on DNS causes the player to automatically detect the DNS server address associated with your internet service provider Q...

Page 4: ...ontact Toshiba Customer Service for your country Q6 During HD DVD playback I sometimes experience pixelization block noise or audio dropouts Sometimes playback freezes or stops Sometimes playback is not smooth Does the new firmware address these issues A6 This firmware update addresses various playability issues You should also check to be sure that the disc is clean and if the disc will not opera...

Reviews: