background image

6

En

g

lis

h

Enjoying 3D images

Compatibilities:

Compatible with Toshiba 3D TVs only.
In addition to Compatible Toshiba 3D TV, viewing 3D programming may require 
the following (Please refer to the Toshiba 3D TV):

Compatible 3D Playback Device and compatible 3D content or other 3D Source. 

3D Capable HDMI Cable.

1

Setting television so that 3D images will be shown properly.

•See the television owner’s manual.

2

Using the 3D Glasses.

•When you use for the first time, pull out the insulation sheet inserted in 

the battery cover part.

1)

Hold down the 3D Glasses power button for about 1 second.

The power light turns on for about 2 seconds, and 3D Glasses are 
switched on.

2)

Wear the 3D Glasses.

If the 3D Glasses shift, adjust length by using the provided restraint 
band.

3

When 3D images’s display is something wrong, adjust the TV 
settings. 

•See the television owner’s manual.

•Hold down the 3D Glasses power button for about 1 second. The power light 

blinks 3 times, and 3D Glasses are turned off.

•Store the 3D glasses in the supplied glasses case.

NOTE: 

If the infrared data communication between the television and 3D Glasses 

is lost for 5 minutes, the power of 3D Glasses is turned off to prevent the battery 
being consumed.

After finishing watching 3D images

Pull out 

Stopper

Move the stopper 
and adjust the length 
of the band. 

Put in 

Put in 

3D-glasses_EN.book  Page 6  Thursday, July 29, 2010  4:29 PM

Summary of Contents for FPT-AGO1G









Reviews: