Toshiba e-Studio477s, Advanced Manual, Page: 163 / 264

SETTING ITEMS (ADMIN)
- 163 -
2
1
3
4
5
6
7
2
Press [OLD PASSWORD].
The on-screen keyboard is displayed.
For details of the on-screen keyboard, see the following
page:
 P.227 "On-screen keyboard"
3
Enter the current administrator password
and press [OK].
The input password appears as asterisks (*).
Memo
• If the administrator password is being changed for the
first time, enter “123456” in the [OLD PASSWORD]
box.
4
Set new password and complete the
setting.
1) Press [NEW PASSWORD] to enter new password.
2) Press [RETYPE NEW PASSWORD] to enter the
new password again.
3) Press [OK].
Memo
• When you press [NEW PASSWORD] and [RETYPE
NEW PASSWORD], the on-screen keyboard is
displayed.
For details of the on-screen keyboard, see the
following page:
 P.227 "On-screen keyboard"
Note
• Specify a 6 to 64-character long administrator
password. You can use alphanumerics and the
following symbols.
! # $ ( ) * + , - . / : ; = ? @ \ ^ _ ` { | } ~
Setting the clock
You can adjust the clock built into this equipment by entering
the date and time using the digital keys.
 P.163 "Changing the date and time"
 P.163 "Changing the date format"
Note
• When the time settings of the equipment are adjusted using
the SNTP service, the date and time cannot be set
manually. You can make settings for the SNTP service in the
TopAccess administrator mode. For details, refer to the
TopAccess Guide “Chapter 8: [Administration] Tab
Page”
.
Changing the date and time
1
On the CLOCK screen, press [DATE/TIME].
The DATE/TIME screen is displayed.
2
Highlight the section that you want to edit
using the arrow buttons, enter the value
using the digital keys, and press [OK].
You will be returned to the CLOCK menu screen.
Memo
• When you change either “YEAR”, “MONTH”, or
“DATE”, the day of week in the DAY section will be set
automatically.
Changing the date format
1
On the CLOCK screen, press [DATE
FORMAT].
The DATE FORMAT screen is displayed.