9
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
REPLACEMENT OF PC BOARDS/HDD
9 - 23
9.2.2
HDD fault diagnosis
This code displays the HDD operation history, which is recorded in the HDD, on the control panel. HDD
failure can be diagnosed or predicted with the information displayed.
(1) Display
The following screen is displayed with setting code 08-9065. You can also refer to the same
information by pressing the [ON/OFF] button while pressing [5] and [C] simultaneously and then
selecting “5”.
Fig. 9-64
• Items supported differ depending on the HDD manufacturer.
• “---” is displayed on the VALUE, NAV and Worst columns if items are not supported.
(2) Usage
The combination of the values of ID=05 and c5 is used to diagnose whether or not the HDD has
a physical failure when HDD failure is suspected (service call F100 - F108, F121 or F122
occurred).
Result
Description
Diagnosis
ID
VALUE
05
0
Low possibility of physical failure
HDD replacement
is not required.
c5
0
05
From 1 to 999
Defective sector has been reassigned and HDD is recovered.
HDD replacement
is not required.
c5
0
05
Any value
High possibility of defective sector existence. (There will be a
possibility of physical failure depending on the use of HDD.)
HDD replacement
is recommended.
c5
1 or more
05
Either one is at
least 1000.
High possibility of physical failure
HDD replacement
is recommended.
c5
HDD manufacturer
Model name
HDD serial number