Toshiba e-Studio 332s User Manual Advanced Download Page 69

Page: 69 / 177

Useful Operations for Printing From a Computer

- 69 -

Printin

Printing Out PS Errors

You can print out a PostScript error when it

occurs.

Note

This function is not available with the Windows PCL printer
driver and the Windows PCL XPS printer driver.

For Windows PS Printer Driver

Open the file you want to print.

From the [

File

] menu, select [Print].

Click [

Preferences

On the [

Layout

] tab, click [

Advanced

Click [

Send PostScript Error Handler

]

under [

PostScript Options

] and select

[

Yes

] from the drop-down list.

Click [

] until the print setup dialog

box is closed.

For Mac OS X PS Printer Driver

Note

This function is not available with the Mac OS X 10.5 to
10.7.

Open the file you want to print.

From the [

File

] menu, select [

Print

Select [

Error Handling

] from the panel

menu.

Select [

Print detailed report

] at

[

PostScript Errors

Click [

Print

Changing Emulation Mode

You can select the emulation mode.

Memo

To enter the [

Admin Setup

] menu, an administrator

password is necessary. The default password is "aaaaaa".

Press the <

SETTING

> key on the

operator panel.

Press the to select [

Admin Setup

]

and then press .

Enter the administrator password.

Select [

Enter

] and then press .

Press the to select [

Print Setup

] and

then press .

Press the to select [

System

Configuration Menu

] and then press .

Make sure [

Personality

] is selected and

then press .

Press the to select an emulation mode
and then press .

Press the until the top screen appears.

Summary of Contents for e-Studio 332s

















































































































































































Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands

Toshiba e-Studio 332s, User Manual Advanced

Search results

Summary of Contents for e-Studio 332s

Reviews:

Related manuals for e-Studio 332s

Brands by name

Popular brands