Toshiba e-STUDIO 257 Copying Manual Download Page 138

Page: 138 / 172

6 TEMPLATES

136 Registering Templates

Select a template.

1) Press a blank button.

2) Press [SAVE].

To switch the menu

Press

Enter the necessary information about the template.

NAME 1 & 2:

Enter the name of the template. NAME 1 appears above the template button and NAME

2 appears below. Be sure to enter at least one of them. When you press either of them, the on-

screen keyboard appears. Enter within 11 characters.

USER NAME:

Enter the name of the template owner as required. When you press it, the on-screen

keyboard appears. Enter within 30 characters.

PASSWORD:

Key in a password here, if you want to require a password to recall the template. When

you press it, the on-screen keyboard appears. Follow the procedure below.

Summary of Contents for e-STUDIO 257











































































































































































Search results

Summary of Contents for e-STUDIO 257

Reviews:

Toshiba e-STUDIO 257, Copying Manual, Page: 138 / 172

Search results

Summary of Contents for e-STUDIO 257

Reviews: