e-STUDIO2555C/3055C/3555C/4555C/5055C
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 76
4.6
Developer Unit, Cleaner
4.6.1
Waste toner box
4.6.2
Developer unit
(1)
Open the front cover.
(2)
Press down the hook and remove the waste
toner box [1].
Fig. 4-214
(1)
Remove the waste toner box.
P. 4-76 "4.6.1 Waste toner box"
(2)
After pressing the lever [1] down, while
pressing down the developer unit cover level
[2], hold the knob [3] and remove the
developer unit [4].
Fig. 4-215
Notes:
•
When inserting the developer unit, align
the corner [1] of the developer unit guide
with the R part [2], and the corner [3] of
the developer unit with the R part [4].
•
If the lid of the developer unit is not closed
while you take out the unit, close it by
hand. Toner may spill from the developer
unit if it is tilted with the lid open.
Fig. 4-216
Summary of Contents for e-studio 2555c
