Toshiba e-studio 180s User Manual Download

Page: 57 / 75

Installing Printer Software in Windows

•

Typical

: Installs the most common software for your

printer. This is recommended for most users.

•

Custom

: Allows you to choose the individual

components you want to install.

OTE

: If your printer is not already connected to the

computer, the following window will appear.

• After connecting the printer, click

Next

• If you don’t want to connect the printer at this time, click

Next

, and

on the following screen. Then the installation

will start and a test page will not be printed at the end of the
installation.

• The installation window that appears in this User’s

Guide may differ depending on the printer and
interface in use.

After the installation is finished, a window asking you to
print a test page appears. If you choose to print a test
page, select the checkbox and click

Next

Otherwise, just click

Next

and skip to step 7.

If the test page prints out correctly, click

Yes

If not, click

to reprint it.

Click

Finish

OTE

: After setup is complete, if your printer driver doesn’t

work properly, reinstall the printer driver. See “Reinstalling
Printer Software” on page 5.

Summary of Contents for e-studio 180s












































































Search results

Summary of Contents for e-studio 180s

Reviews:

Related manuals for e-studio 180s

Brands by name

Popular brands

Toshiba e-studio 180s, User Manual

Search results

Summary of Contents for e-studio 180s

Reviews:

Related manuals for e-studio 180s

Brands by name

Popular brands