Toshiba Dynabook Vx/4, Maintenance Manual

Page: 87 / 284

3.2 Quick Start 3 Diagnostic Programs
1. Diagnostics Windows
When a test item is running, a Diagnostics Windows is displayed in full screen. It consists of
the following parts: Title Bar, Test Running Status and Report Panel, Status Bar. There
would prompt a message box called USER BREAK in the central of the window whether
user press
ESC to interrupt the test.
2. Test Running Status and Report Panel
Test Running Status and Report Panel are located on the middle of Diagnostics Windows.
‹ Test item name, test process and test result are displayed in the left;
‹ Test status and result are displayed in the upper right corner of the screen. It displays the
test status of the current test item – TEST (in testing), PASS (test finished and its result
is passed), FAIL (test finished and its result is failed) and SKIP (test skipped).
‹ The error list of each test module is displayed at the lower right corner of the screen. It
would display the total error quantity found in the test, the most recent five error codes
and description would be shown here. Detailed error report could be viewed with
Logview.exe.
‹ When pressing ESC key during the test process, a User Break Windows will be popped
up for the user to select.
3. USER BREAK
Pressing ESC key to interrupt the test, USER BREAK message box would be prompted out
in the central of Diagnostics Window for the user to select the following actions:
‹ CONTINUE ---- Continue the test;
‹ SKIP ---- Stop the sub-item of current test item to go to the next item’s test;
‹ ABORT ----Stop the current test item to test the next module.
‹ ABORT ALL ---- Stop all the selected test items. User could use the hot key Ctrl+D to
achieve the same operation. When the user calls ABORT ALL, the following message
box will prompt for his selecting.
4. Title Bar:
Satellite M40/M45 TECRA A4 Dynabook Vx/4 Maintenance
Manual 13