manualshive.com logo in svg

Toshiba DX1210-ST4N22, User Manual

Share
Download
Toshiba DX1210-ST4N22 User Manual Download Page 32

32

Getting Started

Adding memory (optional)

The computer has two memory slots—Slot A and Slot B. You can 
install one or two memory modules.

Before you install or remove a memory module, turn off the computer 
using the Start menu. If you install or remove a memory module 
while the computer is in Sleep or Hibernation mode, data will be lost.

For this model, Slot A is the bottom slot. Slot B is the top slot. If only 
one memory module is to be installed, it must be installed in Slot A. 

If the computer is on, begin at step 

1

; otherwise, skip to step 

3

.

1

Click 

Start

.

 

(Sample Image) Shut down button

2

Click the 

Shut down

 button in the lower-right corner of the 

Start menu.

The computer closes all open programs, shuts down the 
operating system, and then turns off.

3

Unplug and remove any cables connected to the computer, 
including the AC adaptor.

NOTE

Shut down button

Start button

Summary of Contents for DX1210-ST4N22






















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands