To achieve a better drying performance with limited rinse aid, the dishwasher is designed to
adjust the consumption by user. Follow the below steps.
1. Close the door and s
witch on the appliance
.
2. Within 60 seconds after step 1, press the Start/Pause button more than 5 seconds,
and then press the Delay button to enter the set model, the rinse aid indication
blinks as 1 Hz frequency.
3. Press the Start/Pause button to select the proper set according to your using habits ,
the sets will change in the following sequence: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid the dishwasher uses.
4. Without operation in 5 seconds or press the Power button to exit the set model,
the set success.
3
Close the cap after all.
2
Pour the rinse aid into the dispenser,
being careful not to overfill.
1
Remove the rinse reservoir cap by
lifting up the handle .
Adjusting the rinse aid reservoir
Adding rinse aid to the dispenser
English
19
