58
EN
5
Select “Yes” using [
K
\
L
], then press
[ENTER
\
OK].
Adding a chapter mark:
If you select “Add” at step
4
, a new chapter mark is
created at the point you specified.
Deleting a chapter mark:
If you select “Delete” at step
4
, the chapter mark you
selected is deleted.
6
Press [RETURN/BACK] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
• Maximum numbers of chapter for each media:
Besides the mentioned above, the number of chapters
may be different according to the recording time.
• You may not be able to add chapter marks depending on the
duration of the title or the number of chapters.
• Remaining time of the disc may decrease when adding
chapter marks or increase when clearing chapter marks
depending on the recording time or edited contents.
For titles in video mode DVD-RW disc, you can set or edit
chapter at every selected time interval at once. You can also
clear all the chapter marks at once.
You can only specify the interval of chapter marks that last for
more than 5 minutes.
Press [DVD] first.
1
Follow the steps
1
to
3
in “Editing Title Name”
on page 57.
2
Select “Chapter Mark” using [
K
\
L
], then press
[ENTER
\
OK].
3
Select the desired interval using [
K
\
L
], then
press [ENTER
\
OK].
4
Select “Yes” using [
K
\
L
], then press
[ENTER
\
OK].
Chapter marks are added.
If you select “OFF” at step
3
, all the chapter marks are
erased.
5
Press [RETURN/BACK] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
Note
• You cannot select the chapter mark the title of which is less
than 5 minutes.
• You cannot select a chapter mark interval that exceeds the
length of a title.
• The length of chapters may slightly deviate from the one
specified at the step
3
.
• A chapter mark may be delayed depending on the recording
content.
• Maximum number of chapter for video mode DVD is 99
chapters per disc and title.
You can hide chapters from the title list.
Hidden chapters are skipped during playback.
Press [DVD] first.
1
Follow the steps
1
to
3
in “Editing Title Name”
on page 57.
2
Select “Hide Chapter” using [
K
\
L
], then press
[ENTER
\
OK].
3
Use [SKIP
H
\
G
], [PLAY
B
] and [PAUSE
F
]
to decide the chapter to be hidden.
4
Select “Hidden” using [
K
\
L
], then press
[ENTER
\
OK].
5
Press [RETURN/BACK] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
If you want hidden chapters to be “Visible”, select the
chapter to be shown. Then use [
K
\
L
] to select
“Visible” at the step
4
above.
Data will be written onto the disc momentarily.
Note
• “Hidden” will be displayed in the preview window while
previewing the hidden chapter.
• When you make all chapters in the title “Hidden”, “Hidden” is
displayed in a thumbnail of the title list.
To prevent the accidental editing or erasing of the titles, you
can protect them in the Original menu.
Press [DVD] first.
1
Follow the steps
1
to
3
in “Editing Title Name”
on page 57.
2
Select “Protect” using [
K
\
L
], then press
[ENTER
\
OK].
3
Press [ENTER
\
OK] again.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
• If the title is already protected, “ON
A
OFF” will appear
instead. Press
[ENTER
\
OK]
, to release the title from
protection.
• The protected title will be marked with
icon.
4
Press [RETURN/BACK] repeatedly to exit.
Writing onto the disc starts.
It may take awhile to write the data on a disc.
To protect a whole disc
(VR mode DVD-RW and DVD+RW/+R discs only):
Select “Disc Protect OFF
A
ON” from “DVD Menu”, then
select “Yes”. Refer to “Setting a Disc to Protect” on
page 42.
VR mode DVD
: 999 chapters per entire Playlist and
Original
+VR mode DVD : 254 chapters per disc, 99 chapters per
title
Adding or Deleting Chapter Marks at
once for Video Mode DVD-RW disc
DVD-RW
DVD-RW
DVD-RW
Video
Hiding Chapters
Protecting Titles
DVD+RW
DVD+RW
DVD+RW
DVD+R
DVD+R
DVD+R
DVD-RW
DVD-RW
DVD-RW
VR
Original
E9TK4BD_EN.book Page 58 Wednesday, January 6, 2010 10:05 PM
