Toshiba DKT3000/2000 Page 23 User Manual Download

Page: 23 / 104

The Basics

Making a Call

Strata CTX DKT3000/2000-Series Telephone 05/02

Making a Call

There are three ways to originate a call from your digital telephone:

Hot Dialing

1. To make a call using Hot Dialing, dial the number.

When you start to dial, the extension button, Spkr and Mic LEDs light. Digits
display as they are dialed. Call progress tones (Ringback Tone, Busy Tone, etc.)
play through the speaker.

2. When connected, you can continue speakerphone operation or lift the handset and

continue the conversation.

Spkr Button

1. To make a call, press

6SNU

A line may be automatically selected or you can manually choose a line. Your
extension or

/LQH

button lights (depending on system programming). Dial tone

plays through the speaker. The Spkr and Mic LEDs light.

2. Dial the number.

Digits display as they are dialed. Call progress tones (Ringback Tone, Busy Tone,
etc.) play through the speaker.

3. When connected, you can continue to use the speakerphone or lift the handset and

continue the conversation.

Handset

1. To make a call, lift the handset, then dial the number.

A line may be automatically selected or you can manually choose a line. Dial tone
plays through the handset. The Spkr and Mic LEDs do not light.

Digits display as they are dialed. Call progress tones (Ringback Tone, Busy Tone,
etc.) are heard through the handset.

2. When connected, you can continue to use the handset or switch to speakerphone by

holding down

6SNU

and replacing the handset.

Summary of Contents for DKT3000/2000









































































































Search results

Summary of Contents for DKT3000/2000

Reviews:

Related manuals for DKT3000/2000

Brands by name

Popular brands

Toshiba DKT3000/2000, User Manual

Search results

Summary of Contents for DKT3000/2000

Reviews:

Related manuals for DKT3000/2000

Brands by name

Popular brands