’
04/08/27
Ver1.01
＊本資料に記載された内容は予告なく変更する場合がありますので、予めご了承下さい。
3
6. HOW TO MOUNT YOUR CAMERA
(1) Option 1: Camera tripod fixing kit
Use a dedicated tripod fixing kit (option unit) to fix your camera onto a tripod, etc.
(See the diagrammatic sketch shown below)
(2) Option 2 : Mounting holes (Bottom side)
Put M3 screws through screw-holes to fix the camera. Be sure to use screws which are shorter than
specified length. Longer screws may damage the inner circuit board.
(2-1)To fix your camera by using the mounting holes (a) above (= 2 places), be sure to use 3mm or
shorter screws.
(2-2)To fix your camera by using the mounting holes (b) above (= 4 places), be sure to use 5mm or
shorter screws.
(2-3)To fix your camera by using the mounting holes (c) above (= 2 places), be sure to use 3mm or
shorter screws.
7. INTERFACE
(1) DC IN/SYNC
Connector (Camera side): HR10A-10R-12PB (Manufactured by HIROSE DENKI)
Plug (Cable side): HR10A-10P-12S (Manufactured by HIROSE DENKI)
Pin number
Signal name
1
GND
2
+12V
3
N.C
4
N.C
5
HD GND
6
E.HD IN
7
E.VD IN
8
GND
１
２
３
４
５
６
７
８
９
10
11 12
Rear-view
