a
By inserting the AC Adapter into the AC Adapter Jack on the Expansion Unit.
– 3 –
a
By connecting the External Connection Port (concave side) on the Expansion Unit into the USB
Cradle (GENIO e accessory), and connecting the AC Adapter into the USB Cradle.
Groove
L
How to Confirm the Remaining Battery Power of the Expansion Unit
Connect the Expansion Unit to the GENIO e, turn the GENIO e ON, and tap "Start" menu and then
"Settings". On the "System" tab, tap "Power". The remaining battery power is displayed at the
"External Battery" item on the "Battery" tab.
L
How to Connect the Expansion Unit to the GENIO e
1. Align the protrusions on the inside of both ends of the Expansion Unit with the groove at both
ends of the GENIO e Place the GENIO e on top of the Expansion Unit.
2. Slide the GENIO e and insert the Cradle Connection Port on the GENIO e into the External Con-
nection Port (convex side) on the Expansion Unit.
a
Firmly insert the port until you hear it click into place.
The GENIO e sometimes turns ON if the PC CARD is already installed on the PC CARD
Expansion Unit.
a
The Cradle also can be connected.
a
Follow the above procedure in reverse to remove the Expansion Unit.
NOTE
a
Do not connect two Expansion Units on top of each other. Doing so might cause a malfunction.
