Toshiba Carrier RBC-AX33UYP-UL, Operation Manual

Page: 9 / 48

EN
6
HOW TO USE REMOTE CONTROLLER
■
Cooling/heating/fan only operation
Start
SWING FAN
1
START/STOP button ( )
Press this button to start the air conditioner.
2
Mode select button (MODE)
Select Cool , Heat , or Fan only .
3
Temperature button ( )
Set the desired temperature.
When the air conditioner is in FAN ONLY operation,
the temperature display is not indicated.
4
Fan speed button (FAN)
Select one of LOW , LOW + ,
MED , MED + , HIGH .
• The OPERATION lamp on the display panel of
the indoor unit goes on. And operation starts after
approximately 3 minutes. (If you select FAN ONLY
mode, the unit will start immediately.)
• The : Fan only mode does not control temperature.
• Fan speed is the same as
HIGH .
Therefore, perform only steps
1
,
2
and
4
to select
this mode.
Stop
START/STOP button ( )
Press this button again to stop the air conditioner.
NOTE
When the indoor unit is operated together with a cooling
only outdoor model outdoor unit,
appears on the
remote controller but the heating operation is disabled.
■
Dry operation
Start
SWING FAN
1
START/STOP button ( )
Press this button to start the air conditioner.
2
Mode select button (MODE)
Select Dry .
3
Temperature button ( )
Set the desired temperature.
• The fan speed display indicates .
• The OPERATION lamp on the display panel
of the indoor unit lights, and operation starts after
approximately 3 minutes.
Stop
START/STOP button ( )
Press this button again to stop the air conditioner.
Operations Manual
- 8 -
8-EN
00_OM_1127699206_book.indb 8 00_OM_1127699206_book.indb 8 9/8/21 17:37 9/8/21 17:37