Toshiba XXXXXXX(
X
/X)
– 19 –
4-way Air Discharge Cassette Type
Owner’s Manual
Cancel louver lock
Set the louver direction to “0000” in step 4 of the louver lock setup procedure.
• When the setting is cancelled,
goes out.
Perform the same operations as steps 1, 2, 3, 5, and 6 above.
Change power saving mode setting
1
Push
button for at least four seconds
when the air conditioner is not working.
•
and numbers flash.
2
Push
(left side of button) to select an
indoor unit to be set.
• Each time you push the button, unit numbers
change as follows:
The fan of the selected unit runs and the louvers
start swinging.
3
Push TIME
buttons to adjust the
power-save setting.
• Each push of the button changes the power
level by 1% within the range from 100% to 50%.
* The factory default is 75%.
4
Push
button.
5
Push
button to complete the setting.
“0000”
SET DATA
4
3
1
5
2
UNIT No.
1-1
UNIT No.
1-2
UNIT No.
1-3
UNIT No.
1-4
Setting of power level in
power saving mode
19-EN
+00EH99933501_00Ta.book Page 19 Tuesday, November 24, 2009 2:25 PM
