66
Getting Started
Using external display devices
❖
Adjust the sensitivity of the touch pad, so that it is less
responsive to accidental light taps and lighter finger pressure.
Touch pad setting options vary by computer model. The touch pad
settings are accessible through the Mouse Properties option of the
Windows Control Panel. For more information, please visit
Disabling or enabling the touch pad
The touch pad is enabled by default. To enable/disable the touch
pad, press
F5
. For more information, see
.
Connecting an external device
Depending on your system, some models may include USB 3.0
port(s). To distinguish these ports, please look for the blue inset
within the USB 3.0 port (if available).
You can easily attach an external device your computer.
To do this:
1
Read the directions that came with the device to see if you first
need to install new software.
2
Connect the device’s video or USB cable to the port on the
computer and to the device.
3
Connect the device’s power cable to a live electrical outlet
(if applicable).
4
Turn on the external device (if applicable).
Your computer may automatically detect the external device.
Using external display devices
Your computer comes with a built-in display, but you can also
connect the following types of external display devices to the video
ports described below:
To locate your HDMI™ or RGB port, please refer to your Quick Start
document.
NOTE
NOTE
NOTE
