Toshiba C300* Series, Manual

Page: 22 / 220

TIMER
Sleep timer 01:30
On timer 00:00
On timer Position 01
MENU Back EXIT Watch TV
FUNCTION
Teletext Auto.
Panel lock On
Auto format On
4:3 stretch Off
Blue screen On
Side panel 1
MENU
Back
EXIT
Watch TV
English
22
Panel lock, time display,
stereo/bilingual transmissions, the timer
From the FUNCTION menu select Panel lock
and choose On or Off using
z
or
x
.
Panel lock disables the buttons on the television. All
buttons on the remote control can still be used.
Panel lock
1
When Panel lock is On , a reminder will appear when
the buttons on the television are pressed. If the standby
button is pressed the television will switch off and
can only be brought out of standby by using the
remote control.
Press
e
to select On or Sleep timer . Use the
number buttons to set the required time. For
example, to switch the television off in one and a
half hours enter 01:30, or press
x
to
increase/decrease in steps of 10 minutes.
If setting the Sleep timer , press EXIT to finish. If
setting the On timer , press
e
to select On timer
Position , enter the programme position number
required, then press i to put the television into
Standby. The GREEN On timer indicator on the
front of the television will now
be lit.
Any equipment connected with SCART leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timer has been set the television
can be switched on at any time by pressing i .
The GREEN On timer indicator will remain on
until the set time period as passed when the
television will go to the chosen channel. This
feature can help to avoid missing favourite
programmes.
To cancel the On timer/Sleep timer , enter zero
in each position.
The television can be set to turn itself On or Off after a
certain time.
The Timer
2
3
4
1
Press MENU and
z
or
x
to select the TIMER
menu.
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo… Press
O
I/II
to select Stereo or Mono .
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word Dual will display . Choose the
required programme number and if the word Dual
appears press
O
I/II
to select Dual 1 , Dual 2 or Mono .
Stereo and Bilingual transmissions
The time display facility allows the current (text service)
time to be seen on the television screen.
Press
8
/
9
whilst watching a normal television
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.
The Time Display
g g