GB-3
TOSHIBA Bluetooth Module Installation
11. Disconnect the keyboard ribbon cable and remove the keyboard.
Figure 4: Removing the keyboard
12. Disconnect the touch pad cable.
13. Remove the touch pad assembly while releasing the latches on both
sides of it.
Figure 5: Removing the touch pad assembly
14. Connect the antenna cable to the Bluetooth module.
15. Connect the other end of the flexible cable to the Bluetooth module.
16. Connect one end of the flexible cable to the connector on the computer.
17. Seat the Bluetooth module.
18. Pass the antenna cable to the slit.
Keyboard ribbon cable
Keyboard
Touch pad cable
Touch pad assembly
Summary of Contents for Bluetooth Module
Page 2: ...ii ...