24
Setting up the player
Find the correct viewing input
1
Press the button to turn on this product.
2
Turn on the TV and switch to the correct video-in input (refer to the TV user’s manual for
instructions on how to select the correct input).
Initial Setting
When you turn on this unit for the first time, or restore all settings to factory defaults, the system
will prompt you to perform the initial setup.
1
Follow the on-screen instructions to customize the following settings to your preference:
OSD Language
For more information, please see the
“
Language Setting
” section on
page 34
.
Resolution
For more information, please see the
“
Resolution
” section on
page 36.
Aspect ratio
For more information, please see
“
TV Screen
” section on
page 36.
Network Interface
For more information, please see the
“
Interface
”
section on
page 33.
Portal Auto Start
For more information, please see
“
Portal Auto Start
”
section on
page 32.
2
After selecting the settings, press the
OK
button to confirm and exit.
SETTING menu
Press the
SETTING
button on the remote control to display the setup screen.
For more information, please see the
“
Customizing
” on
page 30.
ePortal Home
Press the button on the remote control to display the ePortal Home screen when there is no disc
playing or the player is in Stop mode.
For more information, please see the
“
Navigating the ePortal Menu
” on
page 38.
Basic playback
1
Press the button on the front panel or the remote control; your Symbio
®
Streaming
Media and Universal Disc Player will turn on.
2
Turn the TV on and then select the input setting on the TV that matches the connection method
you used to connect your player.
3
Press the button on the remote control to open the disc tray.
4
Place a disc on the disc tray with the label facing up, and then press the button to close the
disc tray. The disc loading time depends on the types of disc you are loading.
5
After loading a disc, the playback starts automatically.
6
If a Blu-ray
TM
disc or DVD menu is displayed, use cursor buttons to select
PLAY.
Then, press
the
OK
button to confirm.
Blu-ray Disc™ playback