30
Function setup
Customizing the Function Settings
1. In the main menu of
Settings
, press button to select
Display
, and then press
OK
to confirm.
Display Setting
HDMI Status:
This option displays the HDMI status. If an HDMI TV is
connected,
Connected
appears. If an HDMI TV is not
connected,
Disconnected
appears.
HDMI Preferred Format:
This option shows the best HDMI format for the connected
TV.
Resolution:
You can define the video output resolution in this option. In
case that the menu of “Resolution” setting disappears, make
composite video (yellow) connection to restore it, then select
the resolution which is compatible with the connected TV.
Notes:
Selecting a resolution the TV does not support could
•
result in an unstable picture or loss of the picture. See
the documentation that came with the TV to find the
resolutions the TV supports.
Only the HDMI output on your player supports 1080p
•
video output at any frame rate. If the TV is connected
to the component output, the video output is limited to
1080i or lower.
TV Type
Resolution
If your TV is a high-definition TV(HDTV)
connected to the HDMI jack on your
player and you want your player to set
the output resolution based on informa-
tion exchanged between the TV and your
player over the HDMI cable.
HDMI Auto
If the TV is a high-definition TV (HDTV)
capable of 1080p (any frame rate) con-
nected to the HDMI jack on your player
1080p (HDMI)
If your TV is a high-definition TV (HDTV)
capable of 1080i only
1080i
If your TV is a high-definition TV (HDTV)
capable of 720p only
720p
If your TV is an enhanced-definition TV
(EDTV)
480p
If your TV is a standard-definition NTSC
TV (American or Asian SD TV)
480i
TV Aspect:
16:9 wide, 16:9 Pillarbox, 4:3 Pan and Scan
and
4:3 letter
Box
are available for your choice.
Film Mode:
Movies are recorded on film at a rate of 24 pictures (frames)
per second. Many of the movies on Blu-ray discs are placed
on the discs at this frame rate. If your TV supports 24 frames
per second, but you would prefer viewing the video at a
higher frame rate, you should turn off Film Mode.
Off
selects
a 60 frames/second output format.
Deep Color:
This option decides whether to turn off the Deep Color
(color depth) setting for video signals output from the HDMI
OUT jack.
Connecting the player and a TV that supports Deep
Color allows more accurate color reproduction than when
connecting it to a TV that does not support Deep Color. It is
recommended to set this option
Off
if the picture is unstable
or colors appear unnatural.
2. Press / to select an option, and then press
OK
.
3. Use / to select the desired option, and then press
OK
to confirm your selection.
4. Press to go to the previous menu.
Display
HDMI Status Connected
HDMI Preferred Format 1080p(HDMI)
Resolution HDMI Auto
TV Aspect 16:9 Pillarbox
Film Mode Off
Deep Color On
