20
English
3. Press RETURN to exit.
Brightness
Contrast
Hue
Saturation
RETURN Exit
Change
•
[Sharpness]
Select the level of sharpness: High,
Middle, Low.
{
High
} - Select High sharpness level.
{
Middle
} - Select Middle sharpness.
level.
{
Low
} - Select Low sharpness level.
Audio Setting
1
.
Press SETUP
, [General Setting]
menu
is displayed.
2
.
Press
to select
[Audio Setting]
,
then press
.
3
.
Select an option, press
to access.
SETUP Exit
Audio Output
Spdif
PCM
PCM
48K
HDMI
Down_samp
Auto
Dolby DRC
Audio Setting
Move cursor key to select menu option
then use “OK ” key to select
4
.
Press
/
to select a setup option and
press
.
5
.
Select the setting you wish to change
and press OK to confirm.
- Press
to return to the previous
menu.
- Press
SETUP to exit the menu.
[Audio Output]
{
Bitstream
} – Output HDMI digital
signal without any processing.
{
PCM
} – Output HDMI digital signal
with processing, only two channels
export.
{
Re-encode
} – Auto select signal type
from HDMI Out jack according to the
Audio stream on disc.
{
Off
} – No output for HDMI.
•
[Down_samp]
Select the digital audio signal sampling
frequency.
{
48K
} – For discs recorded at sampling
rate of 48 kHz.
{
96K
} – For discs recorded at sampling
rate of 96 kHz.
{
192K
} – For discs recorded at sampling
rate of 192 kHz.
•
[Dolby DRC]
Select the Dynamic Range Control mode
which makes it available to listen to a
movie at a low volume without losing
sound clarity.
{
Off
} – Non-dynamic range compress.
{
On
} – Dynamic range compress.
{
Auto
} – Adjust the DRC according to
input audio.
The setting of Auto is effective for Dolby
TrueHD.
System Information
1
.
Press SETUP
,
[
General Setting
] menu
is displayed.
2
.
Press
to select
[System
Information]
.
- The current software version and MAC
address will be displayed.
- Press
to return to the previous
menu.
- Press
SETUP to exit the menu.
SETUP Exit
System Information
Move cursor key to select menu option
then use “OK ” key to select
Software version: V XX
MAC: E8-9D-87-XX-XX-XX
•
[Spdif]
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Re-encode and Off.
{
Bitstream
} – Output digital signal
without any processing.
{
PCM
} – Output digital signal with
processing, only two channels export.
{
Re-encode
} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
{
Off
} – No output for S/PDIF.
•
[HDMI]
Select the output mode of HDMI Out
jack, options include Bitstream, PCM,
Re-encode and Off.
